Nanolex Si3D Ceramic Coating

From: £39.99

Clear

Earn up to 60 Points.

or

 

Description

Based on its unique Si3D technology, Nanolex Car Care offers a range of products specifically developed and designed to fulfil the highest demands and needs of our professional customers.

The Si3D molecules – precursors of ceramic and hybrid materials – consist of silica, nitrogen, hydrogen and organic compounds such as carbon. These high-performance polymers are all solvent and fluorine free.

The additionally-implemented thermoplastic component forms an incredibly hydrophobic, flexible, cross-linked matrix to give an outstanding hardness and durability.

Nanolex Si3D is extremely weather and chemical resistant, which in turn provides excellent corrosion protection with easy-to-clean-properties.

Si3D can also increase the total hardness of the paint to up to 9H+, adding a clear coat with a colour-darkening effect to the treated surface.

Depending on the number of applied layers of Si3D, the thickness of the coating can vary. The coating thickness, combined with the sophisticated structural nature of the Si3D matrix, make the coatings resistant to abrasion caused by frequent washing and also unaffected by most chemical substances.

An important part of automotive coatings are solvents. The liquid consistency, viscosity and volatility of the product is highly dependent on the used solvents. Nanolex Car Care do not incorporate any aromatic solvents in their product formulations, due to the high potential of ‘hazardous-to-health’ character, thus making them safe use in an enclosed environment.

The Si3D coatings have very good ‘solvent release’ properties – about 90% of the solvents will evaporate during the first 24 hours, with the remaining 10% evaporating within one week. Please take note that solvent evaporation is also greatly dependant on temperature and weather conditions.

Nanolex Car Care do not incorporate any aromatic solvents in their product formulations, due to the high potential of ‘hazardous-to-health’ character, thus making them safe use in an enclosed environment.

Unlike traditional protective coatings such as car wax and conventional polymer coatings, where the protective efficiency decreases with time, and from using degreasing or alkaline detergents, or because of mechanical removal, Nanolex Si3D coating exhibits outstanding durability and a tough insensitivity to abrasion from frequent washing and the use of strong alkaline or acidic detergents.
With proper maintenance Nanolex Si3D will have a durability of approximately 30000 km on the surfaces it was applied to.

Nanolex Si3D was developed, tested and manufactured in Germany.

Choice of either 30ml or 50ml bottle size

PLEASE NOTE:
DUE TO THE SIZE OF THESE BOTTLES THE INSTRUCTIONS WILL NOT FIT ONTO THE BOTTLE, SO PLEASE WHEN YOU HAVE MADE YOUR NANOLEX PURCHASE, DOWNLOAD & PRINT OFF YOUR USER MANUAL ON THE LINK BELOW:

DOWNLOAD PDF INSTRUCTION MANUAL HERE!!

Features

Easy to apply

Solvent and flourine free

High resistance to abrasion and weathering

Produces a high gloss finish

Enhances the paints clarity and colour

Durability of approximately 20,000 miles

Nanolex Si3D was developed, tested and manufactured in Germany

Directions For Use

Nanolex Si3D Ceramic Coating

From: £39.99

 

Description

Based on its unique Si3D technology, Nanolex Car Care offers a range of products specifically developed and designed to fulfil the highest demands and needs of our professional customers.

The Si3D molecules – precursors of ceramic and hybrid materials – consist of silica, nitrogen, hydrogen and organic compounds such as carbon. These high-performance polymers are all solvent and fluorine free.

The additionally-implemented thermoplastic component forms an incredibly hydrophobic, flexible, cross-linked matrix to give an outstanding hardness and durability.

Nanolex Si3D is extremely weather and chemical resistant, which in turn provides excellent corrosion protection with easy-to-clean-properties.

Si3D can also increase the total hardness of the paint to up to 9H+, adding a clear coat with a colour-darkening effect to the treated surface.

Depending on the number of applied layers of Si3D, the thickness of the coating can vary. The coating thickness, combined with the sophisticated structural nature of the Si3D matrix, make the coatings resistant to abrasion caused by frequent washing and also unaffected by most chemical substances.

An important part of automotive coatings are solvents. The liquid consistency, viscosity and volatility of the product is highly dependent on the used solvents. Nanolex Car Care do not incorporate any aromatic solvents in their product formulations, due to the high potential of ‘hazardous-to-health’ character, thus making them safe use in an enclosed environment.

The Si3D coatings have very good ‘solvent release’ properties – about 90% of the solvents will evaporate during the first 24 hours, with the remaining 10% evaporating within one week. Please take note that solvent evaporation is also greatly dependant on temperature and weather conditions.

Nanolex Car Care do not incorporate any aromatic solvents in their product formulations, due to the high potential of ‘hazardous-to-health’ character, thus making them safe use in an enclosed environment.

Unlike traditional protective coatings such as car wax and conventional polymer coatings, where the protective efficiency decreases with time, and from using degreasing or alkaline detergents, or because of mechanical removal, Nanolex Si3D coating exhibits outstanding durability and a tough insensitivity to abrasion from frequent washing and the use of strong alkaline or acidic detergents.
With proper maintenance Nanolex Si3D will have a durability of approximately 30000 km on the surfaces it was applied to.

Nanolex Si3D was developed, tested and manufactured in Germany.

Choice of either 30ml or 50ml bottle size

PLEASE NOTE:
DUE TO THE SIZE OF THESE BOTTLES THE INSTRUCTIONS WILL NOT FIT ONTO THE BOTTLE, SO PLEASE WHEN YOU HAVE MADE YOUR NANOLEX PURCHASE, DOWNLOAD & PRINT OFF YOUR USER MANUAL ON THE LINK BELOW:

DOWNLOAD PDF INSTRUCTION MANUAL HERE!!

Features

Easy to apply

Solvent and flourine free

High resistance to abrasion and weathering

Produces a high gloss finish

Enhances the paints clarity and colour

Durability of approximately 20,000 miles

Nanolex Si3D was developed, tested and manufactured in Germany

Directions For Use

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Nanolex Si3D Ceramic Coating”

Your email address will not be published. Required fields are marked *