Bilt Hamber Auto Quick Detailer is a unique concentrated quick detailer spray, particularly suited to use over auto-balm, but it also has a wide range of other uses…
It safely removes dust and grime without scratching
Unique charged polymers suspend particulate matter to protect highly finished automotive paints from hologram scratching.
So between washing the product acts as an effective “waterless wash” product, saving time and water, but preventing cob-web scratching that can be imparted by non-charged products.
The high-shine imparted protects and beautifies paintwork, inhibits UV degradation and oxidisation.
It also very effectively preserves previously applied last stage products (LSP’s) such as waxes and sealers like cleanser-polish, auto-balm, finis-wax, hydra-wax and micro-fine.
Water based and safe for all automotive paint finishes, auto-QD does not result in chemical build-up or dusty chalky residue.
Will effectively clean paintwork after compounding stages and does not mark or stain plastic trim, rubber or composites and will impart protection and sheen to them too.
Quickly revives gloss, prevents water spotting and more…
Can be diluted with water to provide extremely economical LSP preservation which is particularly suited to auto-balm and as a drying aid to prevent water-spotting of hard water.
auto-QD can also be used as a lubricant for auto-clay to provide a gloss enriched finish, used in combination the stunning finish is ready to go in one hit.
Very concentrated – can be added at just 5% to water.
Effortless application and buffing.
Particularly suited to maintaing the finish of auto-balm.
Does not stain or mark plastic trim and will protect these surfaces too.
Directions For Use
Adjust the strength of auto-QD to suit the task at hand, use neat for maximum gloss, protection and cleaning.
1:20 = drying aid and no rinse wash
1:10 = clay lube, no rinse wash and low gloss qd
1:5 = mid gloss QD and wax application aid
1:2 = high gloss QD
1:1 = max gloss QD, waterless wash and plastic trim shine
Fold the provided microfibre cloth into four, lightly atomise auto-qd onto the surface to be treated and gently wipe the material across the surface. Use another dry microfibre cloth also folded into four to buff to a high shine – no need to wait for curing.