Meguiars 3″ DA Microfibre Cutting Pads

£21.99

or

 

Meguiars DA Microfiber Cutting Discs are part of the Meguiars DA Microfiber Correction System. Each specially engineered microfiber disc levels moderate paint imperfections without creating swirls! Meguiars guarantees it.

3″ pack of two pads

Meguiars DA Microfiber Cutting Discs are made for maximum efficiency, their engineered foam interface offers controlled conformability. As you move the polisher over the paint, the microfibers adapt to the curves and contours of the paint, distributing the abrasives evenly for efficient cutting.

Not only will you love the results, you’ll love the process. Meguiars DA Microfiber Cutting Discs are made to work with Meguiars DA Microfiber Cutting Compound. This combination of products remove mild to moderate defects with minimal dusting, no slinging, and no swirls.

The Meguiars DA Microfiber Correction System is designed for a dual action polisher! this system will work wonders on swirls, many scratches, acid rain spots, and other mild to moderate defects on factory paint. The best part is, it’s easy! The Meguiars DA Microfiber System uses the latest Super-micro abrasive technology to give you a clean, efficient user experience.

 

Features:

Use with a Dual Action (DA) machine polisher at 4800opm

These 3.37″/ 86mm cutting pads have a velcro backing and attach to the Meguiar’s 3″ Soft Buff DA Backing Plate.

New Microfibre disc technology cuts through surface defects with no swirls

Engineered foam interface for optimal cutting efficiency and controlled conformability

Optimised for use with the DA Microfibre Correction Compound – D300

Machine Washable

How to use:

After each pass of the panel you’re working on, be sure to use a pad conditioning brush or compressed air (if you have access to it) to raise the microfiber strands again; this will ensure maximum performance from the pads.

Once the pad you’re using becomes noticeably ‘clogged’ with compound or paint residue (paint transfer can happen on older vehicles), wash the pad by hand or washing machine. The pads can be line dried or spun on your machine polisher (in open-air, away from your vehicle) to speed up the drying process.

After each pass of the panel you’re working on, it’s also advised to allow your dual action polisher to stand for around five minutes to allow the backing plate and machine to cool down. Microfibre cutting systems do create slightly more heat than foam systems, so this step is necessary to prolong the life of the cutting pads, backing plate and your machine.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Meguiars 3″ DA Microfibre Cutting Pads”

Your email address will not be published. Required fields are marked *